
Menu
AXP2101(switch)
- Features
- Description
- Application
- Diagram
- Pin Configuration
- Technical Documents
- Samples & EVM
FEATURES
--3.9V–5.5V Input Operating Range and Support single Cell Battery
--Battery fuel gauge: E gauge 3.0
--Support TWSI(Two Wire Serial Interface) and RSB(Reduced Serial Bus)
--Support high efficiency 1uH inductor buck mode switch charger(customization), 85%@5V-3.8V-1A, Ichg can be up to 1.5A
--Single input to support USB input
--High battery discharge efficiency with 50 mOhm
--High integration includes all MOSFETS, current sensing and loop compensation
--Power off current <40uA(BATFET off,RTCLDO output on)
--4 DCDCs
DCDC1:1.5~3.4V, IMAX=2A
DCDC2: 0.5~1.2V, 1.22~1.54V, IMAX=2A
DCDC3: 0.5~1.2V, 1.22~1.54V, IMAX=2A
DCDC4: 0.5~1.2V, 1.22~1.84V, IMAX=1.5A
--11 LDOs
RTCLDO1/2: 1.8V/2.5V/3V/3.3V, 30mA;
Support RTCLDO1 supplied by backup battery (button battery)
ALDO1~4: analog LDO, 0.5~3.5V, 0.1V/step, IMAX=300mA
BLDO1/2: analog LDO,0.5~3.5V, 0.1V/step, IMAX=300mA
CPUSLDO: for CPUs, 0.5~1.4V, IMAX=30mA
DLDO1/2: analog LDO or power switch, 0.5~3.3V/ 0.5~1.4V, IMAX=300mA
--startup sequence and default voltage of DCDC/LDO setting
--Protection
Input Over-Voltage Protection
Battery Thermistor Sense Hot/Cold to suspend Charging
Programmable Safety Timer for Charger
Die Thermal Balance for Charger
--Battery fuel gauge: E gauge 3.0
--Support TWSI(Two Wire Serial Interface) and RSB(Reduced Serial Bus)
--Support high efficiency 1uH inductor buck mode switch charger(customization), 85%@5V-3.8V-1A, Ichg can be up to 1.5A
--Single input to support USB input
--High battery discharge efficiency with 50 mOhm
--High integration includes all MOSFETS, current sensing and loop compensation
--Power off current <40uA(BATFET off,RTCLDO output on)
--4 DCDCs
DCDC1:1.5~3.4V, IMAX=2A
DCDC2: 0.5~1.2V, 1.22~1.54V, IMAX=2A
DCDC3: 0.5~1.2V, 1.22~1.54V, IMAX=2A
DCDC4: 0.5~1.2V, 1.22~1.84V, IMAX=1.5A
--11 LDOs
RTCLDO1/2: 1.8V/2.5V/3V/3.3V, 30mA;
Support RTCLDO1 supplied by backup battery (button battery)
ALDO1~4: analog LDO, 0.5~3.5V, 0.1V/step, IMAX=300mA
BLDO1/2: analog LDO,0.5~3.5V, 0.1V/step, IMAX=300mA
CPUSLDO: for CPUs, 0.5~1.4V, IMAX=30mA
DLDO1/2: analog LDO or power switch, 0.5~3.3V/ 0.5~1.4V, IMAX=300mA
--startup sequence and default voltage of DCDC/LDO setting
--Protection
Input Over-Voltage Protection
Battery Thermistor Sense Hot/Cold to suspend Charging
Programmable Safety Timer for Charger
Die Thermal Balance for Charger
Description
AXP2101 is a highly integrated power management IC (PMIC) targeting at single cell Li-battery (Li-ion or Li-polymer) applications that require multi-channel power outputs. It provides an easy and flexible power management solution for multi-core processors to meet the complex and accurate requirements of power control.
AXP2101 supports switch charge which function should be customized. Besides, it supports 15 channel power outputs which include 4 channel DCDCs and 11 channel LDOs. To ensure the security and stability of the system, AXP2101 provides multiple channels 14-bit ADC for voltage/temperature monitor and integrates protection circuits such as over-voltage protection (OVP), over-current protection (OCP) and over-temperature protection (OTP). Moreover, AXP2101 features a unique E-Gauge™ (Fuel Gauge) system, making power gauge easy and exact.
AXP2101 supports TWSI and RSB for system to dynamically adjust output voltages, charge current and configure interrupt condition.
AXP2101 supports switch charge which function should be customized. Besides, it supports 15 channel power outputs which include 4 channel DCDCs and 11 channel LDOs. To ensure the security and stability of the system, AXP2101 provides multiple channels 14-bit ADC for voltage/temperature monitor and integrates protection circuits such as over-voltage protection (OVP), over-current protection (OCP) and over-temperature protection (OTP). Moreover, AXP2101 features a unique E-Gauge™ (Fuel Gauge) system, making power gauge easy and exact.
AXP2101 supports TWSI and RSB for system to dynamically adjust output voltages, charge current and configure interrupt condition.

APPLICATIONS
SDV
CDR
IPC
smart doorbell
smart speake

View more
TYPICAL APPLICATION DIAGRAM
PIN CONFIGURATION